Control RME TotalMix FX from your Elgato Stream Deck on Windows and macOS. Faders, mute, solo, 48V, snapshots, DURec, EQ, dynamics, reverb and Room EQ on keys and Stream Deck+ dials, drawn live in the TotalMix look so the deck always shows what the mixer is doing.
Requires an RME interface running TotalMix FX.
- TotalMix look: fader strips with meters, knobs and M/S/48V buttons in the mixer's colours
- Live feedback: change something in TotalMix and the deck follows
- Stream Deck+ dials: turn for levels, press and touch for mute, solo, dim and more
- Volume keys for decks without dials
- Channels by name, with TotalMix's channel colours
- Snapshots, DURec, talkback, dim and the control room
- EQ, dynamics, reverb, echo and Room EQ, including EQ and dynamics curves
- Windows and macOS, one installer
- Stream Deck 6.9 or newer, Windows 10+ or macOS 13+
- TotalMix FX 2.1 with Global OSC for the full feature set (recommended)
- TotalMix FX 1.96–2.0 works with the classic actions
Install TotalMix FX Control from the Elgato Marketplace in the Stream Deck app, or download the plugin file from the latest release and open it.
In TotalMix, open Options → Settings… → OSC:
| Actions | Remote Controller | Mode | Ports in / out |
|---|---|---|---|
| "(TotalMix 2.1+)", recommended | 2 | Global OSC | 7002 / 9002 |
| Classic | 1 | classic | 7001 / 9001 |
Tick In Use and set the Remote Controller Address to 127.0.0.1. For Global OSC, enable Send changes and Send status under Details, and Send Level Messages for meters. Then tick Enable OSC Control in the Options menu. Remote hosts and other ports: setup guide.
| Action | Where | What it does |
|---|---|---|
| Volume (TotalMix 2.1+) | Key or dial | Channel faders, submix sends, pan, preamp gain, Main Out, Speaker B, Phones |
| Toggle (TotalMix 2.1+) | Key | Mute, solo, 48V, phase, EQ, dynamics, control room, groups and more |
| Trigger (TotalMix 2.1+) | Key | Snapshots, presets, DURec, undo/redo, clear solos and mutes |
| Display (TotalMix 2.1+) | Key or dial | Meters, DURec time, DSP load, EQ and dynamics curves |
| FX & Dynamics (TotalMix 2.1+) | Key or dial | Reverb, echo, EQ, low cut, dynamics, Auto Level, Room EQ |
| Levels & Parameters (classic) | Key or dial | Levels, gain, pan and effect parameters |
| Toggle (classic) | Key | Mute, solo, phantom, control room and channel switches |
| Select (classic) | Key | Submixes, banks, snapshots, Quick Workspaces |
- Buttons don't carry over; add them again.
- v3 and v5 both use Remote Controllers 1 and 2. To run both, move one to controller 3 or 4, or uninstall v3.
- MIDI is gone. If you need it, stay on v3.3.5.
Everything else is in the documentation: every action's settings, dials and gestures, devices, troubleshooting and the changelog.
Open a GitHub issue and attach the plugin logs:
- Windows:
%APPDATA%\Elgato\StreamDeck\Plugins\de.shells.totalmixgen2.sdPlugin\logs - macOS:
~/Library/Application Support/com.elgato.StreamDeck/Plugins/de.shells.totalmixgen2.sdPlugin/logs
If you'd like to drop me a coffee for the hours I've spent on this:
This is a private project, I am not affiliated with RME or Elgato.