========================== Bot configuration G-codes

This branch contains gcode files that setup Marlin for the correct default calibration values, and soft-endstop limits.

Name		Name	Last commit message	Last commit date
Config-1111-Original.gcode		Config-1111-Original.gcode
Config-1212-Go-V1.gcode		Config-1212-Go-V1.gcode
Config-1302-LC-V1.gcode		Config-1302-LC-V1.gcode
Config-1303-Plus-V1.gcode		Config-1303-Plus-V1.gcode
Config-1305-Simple-Beta.gcode		Config-1305-Simple-Beta.gcode
Config-1306-Plus-V2.gcode		Config-1306-Plus-V2.gcode
Config-1307-Jr-V1.gcode		Config-1307-Jr-V1.gcode
Config-1308-LC-V2.gcode		Config-1308-LC-V2.gcode
Config-1310-Simple-Maker.gcode		Config-1310-Simple-Maker.gcode
Config-1311-Plus-V2-1.gcode		Config-1311-Plus-V2-1.gcode
Config-1312-Simple Maker-2013.gcode		Config-1312-Simple Maker-2013.gcode
Config-1401-Simple-Maker-2014.gcode		Config-1401-Simple-Maker-2014.gcode
Config-1402-Jr-V2.gcode		Config-1402-Jr-V2.gcode
Config-1403-Simple-Metal.gcode		Config-1403-Simple-Metal.gcode
Config-1404-Plus-V2-2.gcode		Config-1404-Plus-V2-2.gcode
Config-1405-Simple-Maker-2014.gcode		Config-1405-Simple-Maker-2014.gcode
Config-1406-Go-V2-Medium.gcode		Config-1406-Go-V2-Medium.gcode
Config-1407-Go-V2-Small.gcode		Config-1407-Go-V2-Small.gcode
Config-1408-Go-V2-Large.gcode		Config-1408-Go-V2-Large.gcode
Config-Jr-v1.gcode		Config-Jr-v1.gcode
Config-LC-v1.gcode		Config-LC-v1.gcode
Config-Metal-Plus-Dual.gcode		Config-Metal-Plus-Dual.gcode
Config-Metal-Plus-Single.gcode		Config-Metal-Plus-Single.gcode
Config-Plus-1404.gcode		Config-Plus-1404.gcode
Config-Plus-v2.1.gcode		Config-Plus-v2.1.gcode
Config-Simple-v1.gcode		Config-Simple-v1.gcode
README.md		README.md

Navigation Menu