chore(deps): bump the pip-minor-patch group across 1 directory with 3 updates

[dependabot]

Bumps the pip-minor-patch group with 3 updates in the / directory: uvicorn, pydantic and coverage.

Updates uvicorn from 0.52.4 to 0.53.0

Release notes

Sourced from uvicorn's releases.

Version 0.53.0

🌐 Opt-in HTTP/2 support

uvicorn 0.53.0 adds experimental HTTP/2 through zttp, alongside a new zuvloop integration and connection-handling improvements.

uv add uvicorn==0.53.0

• Serve HTTP/1.1 and HTTP/2 with zttp (#2982, #3101). Install zttp, then enable HTTP/2 with --http zttp --http2. Uvicorn negotiates HTTP/2 over TLS with ALPN and supports cleartext prior knowledge.
• HTTP/2 remains experimental. Upgrade-based h2c and WebSockets over HTTP/2 are not supported.

⚙️ More event loop choice

• Run Uvicorn with zuvloop (#3104). Install zuvloop separately and select it explicitly with --loop zuvloop on CPython 3.14 or newer.

🛡️ More reliable connections and proxies

• Honor Connection: close token lists (#3103). Uvicorn now parses comma-separated tokens case-insensitively across HTTP implementations.
• Trust IPv6 loopback proxies by default (#3119). The default FORWARDED_ALLOW_IPS value now includes ::1.
• Keep upgraded WebSockets alive (#3107). Uvicorn cancels the HTTP keep-alive timer when the connection becomes a WebSocket.

Full changelog: 0.52.4...0.53.0

Changelog

Sourced from uvicorn's changelog.

0.53.0 (September 14, 2026)

This release adds experimental HTTP/2 support through zttp. Enable it with --http zttp --http2. Upgrade-based h2c and WebSockets over HTTP/2 are not supported.

Added

• Add experimental HTTP/2 support through zttp (#2982, #3101)
• Add support for zuvloop (#3104)

Fixed

• Handle comma-separated, case-insensitive Connection: close tokens across HTTP implementations (#3103)
• Trust IPv6 loopback in the default FORWARDED_ALLOW_IPS value (#3119)
• Cancel the HTTP keep-alive timer when upgrading to WebSocket (#3107)

Commits

• 421708f Version 0.53.0 (#3136)
• f1a1bff Unset the keep-alive timer when upgrading to WebSocket (#3107)
• 63971ed Document HTTP/2 support (#3130)
• 7d1a005 Remove race from multiprocess health check test (#3128)
• 5ac6265 Add ::1 to FORWARDED_ALLOW_IPS (#3119)
• 098b206 Remove timing race from SIGHUP supervisor test (#3127)
• 968f15e chore(deps): bump the github-actions group with 4 updates (#3113)
• 7d4c08c chore(deps): bump the python-packages group across 1 directory with 11 update...
• fe528a4 Require explicit opt-in for zttp HTTP/2 (#3101)
• fa324a4 chore(deps-dev): bump httpx2 from 2.10.0 to 2.12.0 (#3121)
• Additional commits viewable in compare view

Updates pydantic from 2.13.4 to 2.13.5

Release notes

Sourced from pydantic's releases.

v2.13.5 (2026-08-28)

What's Changed

Fixes

• Allow reuse of validators when plugins are set by @​Viicos in #13535
• Fix missing GC traversal on some pydantic-core struct fields by @​Viicos in #13624
• Fix missing GC traversal in pydantic-core for GeneralFieldsSerializer by @​Viicos in #13629
• Count validated model fields once in smart unions by @​tamird in #13731

Changelog

Sourced from pydantic's changelog.

v2.13.5 (2026-08-28)

GitHub release

What's Changed

Fixes

• Allow reuse of validators when plugins are set by @​Viicos in #13535
• Fix missing GC traversal on some pydantic-core struct fields by @​Viicos in #13624
• Fix missing GC traversal in pydantic-core for GeneralFieldsSerializer by @​Viicos in #13629
• Count validated model fields once in smart unions by @​tamird in #13731

Commits

• 001dea0 Bump pypa/gh-action-pypi-publish action to v1.14.2
• 558379f Bump twine to v7.0.0
• 2cfd5d3 Do not check for docs build
• a735bee Fix more Clippy lints
• 7eed4a1 Fix Clippy 0.1.95 warnings
• b353bbb Prepare release v2.13.5
• 63d2ccc Count validated model fields once in smart unions
• a53ec2e Speed up PyPy CI tests
• d65e0f9 Workaround circular import error in Mypy
• 47a6dbf Fix missing GC traversal in pydantic-core for GeneralFieldsSerializer
• Additional commits viewable in compare view

Updates coverage from 7.15.4 to 7.16.1

Release notes

Sourced from coverage's releases.

7.16.1

Version 7.16.1 — 2026-09-13

• Fix: when the body of an irrefutable case (like case _:) is entirely excluded, the case line is now excluded too, just as an excluded else: body removes the else: line. Previously the case line was left behind and reported as missing. Closes issue 1563 with pull 2269.
• Fix: using CoverageData.update() twice on an in-memory database would fail, as described in issue 2279. This is now fixed.

➡️  PyPI page: coverage 7.16.1. :arrow_right:  To install: python3 -m pip install coverage==7.16.1

7.16.0

Version 7.16.0 — 2026-08-28

• When combining files, now path separator slashes will automatically be converted to the local file system style. This makes it less necessary to define [paths] configuration to combine data across operating systems. Fixes issue 2266.
• The Coverage.switch_context() method now returns the previous context.
• Fix: previously, a [paths] pattern would be replaced everywhere in a file path when it was only meant to be replaced once, in the leading portion of the path. This is now fixed, in pull 2268.
• Fixes to validation of options and configuration settings:
  • Negative precision settings now always cause useful error messages (pull 2261).
  • An invalid regex in the --contexts option (or the [report] contexts setting) reported a confusing “Couldn’t use data file …: user-defined function raised exception” error. Now it raises a proper configuration error naming the bad regex, like other regex settings do (pull 2262).
  • Non-string values in TOML configuration settings now produce a helpful error message instead of a traceback. This affects list settings whose elements aren’t strings (like omit, exclude_lines, or a [paths] entry), file settings like data_file, and any wrong-typed value in the [paths] section (pull 2263).
  • coverage run refuses run-affecting command-line options like --branch alongside --concurrency=multiprocessing, since they can’t reach the subprocesses. The check only recognized multiprocessing as the entire option value, so --concurrency=multiprocessing,thread slipped through and failed later with “Can’t combine statement coverage data with branch data”. Each named concurrency library is now properly considered (pull 2270).
• Fix: coverage annotate -d DIR raised an AssertionError if any measured file had an extension other than .py, such as a .pyw file on Windows. The original extension is now restored on the annotated copy (pull 2265).

➡️  PyPI page: coverage 7.16.0. :arrow_right:  To install: python3 -m pip install coverage==7.16.0

Changelog

Sourced from coverage's changelog.

Version 7.16.1 — 2026-09-13

• Fix: when the body of an irrefutable case (like case _:) is entirely excluded, the case line is now excluded too, just as an excluded else: body removes the else: line. Previously the case line was left behind and reported as missing. Closes issue 1563_ with pull 2269_.

• Fix: using :meth:.CoverageData.update twice on an in-memory database would fail, as described in issue 2279_. This is now fixed.

.. _issue 1563: coveragepy/coveragepy#1563 .. _pull 2269: coveragepy/coveragepy#2269 .. _issue 2279: coveragepy/coveragepy#2279

.. _changes_7-16-0:

Version 7.16.0 — 2026-08-28

• When combining files, now path separator slashes will automatically be converted to the local file system style. This makes it less necessary to define [paths] configuration to combine data across operating systems. Fixes issue 2266_.

• The :meth:.Coverage.switch_context method now returns the previous context.

• Fix: previously, a [paths] pattern would be replaced everywhere in a file path when it was only meant to be replaced once, in the leading portion of the path. This is now fixed, in pull 2268_.

• Fixes to validation of options and configuration settings:

  • Negative precision settings now always cause useful error messages (pull 2261_).

  • An invalid regex in the --contexts option (or the [report] contexts setting) reported a confusing "Couldn't use data file ...: user-defined function raised exception" error. Now it raises a proper configuration error naming the bad regex, like other regex settings do (pull 2262_).

  • Non-string values in TOML configuration settings now produce a helpful error message instead of a traceback. This affects list settings whose elements aren't strings (like omit, exclude_lines, or a [paths] entry), file settings like data_file, and any wrong-typed value in the [paths] section (pull 2263_).

  • coverage run refuses run-affecting command-line options like --branch alongside --concurrency=multiprocessing, since they can't

... (truncated)

Commits

• ccbb992 docs: prep for 7.16.1
• 0697ccc chore: make upgrade
• 12f3595 chore: bump docker/setup-qemu-action in the action-dependencies group (#2280)
• 35b58d3 fix: CoverageData.update() can be called twice on an in-memory database. #2279
• 92e1ce9 chore: bump the action-dependencies group with 4 updates (#2278)
• bf07310 build: quote var expansion (actionlint SC2086)
• 3c434f5 quality: use shellcheck-py to get shellcheck in GitHub CI
• 632f397 build: use .txt instead of .pip, even though it's a stupid extension
• ffc6a4a test: only run diff-cover on pull requests
• 33553b3 fix: exclude the case line when an irrefutable case body is excluded (#2269)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions