diff --git a/_sfp_cage/broadcom-57810s.md b/_sfp_cage/broadcom-57810s.md
index 44c8eed9..94a0591e 100644
--- a/_sfp_cage/broadcom-57810s.md
+++ b/_sfp_cage/broadcom-57810s.md
@@ -25,7 +25,7 @@ It also adds a module option that can be set to disable SFP TX fault detection,
 
 Unfortunately, despite the patches, UEFI eDiag still has to be used to unlock 2.5G capabilities:
 
-- [How-to enable 2.5G capability via UEFI eDiag](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC)
+- [How-to enable 2.5G capability via UEFI eDiag (Internet Archive)](https://web.archive.org/web/20230205060732/https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC)
 
 At this point, use the following command to set the speed to 2.5G:
 ```
@@ -36,7 +36,9 @@ sudo ethtool -s your_network_interface autoneg off speed 2500 duplex full
 
 {% include alert.html content="This card requires a solder mod in order to work with some SFP ONTs." alert="Note"  icon="svg-warning" color="yellow" %}
 
-According to a [blog post](https://rsaxvc.net/blog/2020/8/15/Nokia_G-010S-A_Pin_6_Issue.html), some manufacturers designed their SFP ONTs in a way that doesn't 100% comply with the SFF specification. A solder mod like described in a [dslreports thread](https://www.dslreports.com/forum/r32529545-) might be required to get certain SFP modules to work with this card. This mod grounds `MOD_ABS PIN (6)`, which signals to the card that a module is inserted in the slot. This signals the card to send power to the SFP module.
+According to a [blog post (Internet Archive)](https://web.archive.org/web/20260814045749/https://rsaxvc.net/blog/2020/8/15/Nokia_G-010S-A_Pin_6_Issue.html), some manufacturers designed their SFP ONTs in a way that doesn't 100% comply with the SFF specification. A solder mod like described in a [dslreports thread (Internet Archive)](https://web.archive.org/web/20230920151536/https://www.dslreports.com/forum/r32529545-) might be required to get certain SFP modules to work with this card. This mod grounds `MOD_ABS PIN (6)`, which signals to the card that a module is inserted in the slot (marked green in the picture below). This signals the card to send power to the SFP module.
+
+{% include image.html file="bcm57810S/bcm57810S_solder_mod_pin6.jpg" alt="Broadcom 57810S solder mod" caption="Broadcom 57810S solder mod" %}
 
 ## Affected SFP Modules
 
diff --git a/assets/img/bcm57810S/bcm57810S_solder_mod_pin6.jpg b/assets/img/bcm57810S/bcm57810S_solder_mod_pin6.jpg
new file mode 100644
index 00000000..81f1f486
Binary files /dev/null and b/assets/img/bcm57810S/bcm57810S_solder_mod_pin6.jpg differ